Jc Higgins Serial Number Lookup

Marlin Model 336
TypeLever-actionrifle or carbine
Place of originUnited States
Production history
DesignerL.L. Hepburn, T.R. Robinson Jr.
Designed1948-present
ManufacturerMarlin Firearms (until 2010), Remington Arms (current production)
Variantscurrently: Deluxe, BL, C, C Limited, SS, W
Specifications
Mass7 lbs (3.18 kg)
Length38.5' (97 cm), 42.25' (108 cm)
Barrel length20' (508mm), 24' (610mm)
CartridgeCurrent Offerings (Nov. 29, 2014)
.30-30 Winchester, .35 Remington
No Longer Offered:
.219 Zipper, .307 Winchester, .32-40 WCF, .32 Special, .356 Winchester, .375 Winchester, .38-55 Winchester, .44 Magnum, .410 bore
Model 1895 Chamberings:
.45-70, .444 Marlin, .450 Marlin
Model 1894 Chamberings:
.38 Special/.357 Magnum, .44 Special/.44 Magnum, .45 Colt
Barrels16-24 in
ActionLever action
Feed systemtubular magazine (capacity varies)
Sightsiron sights, optional telescopic, integral 1913 rail on some models

The Marlin Model 336 is a lever-actionrifle and carbine made by Marlin Firearms. Since its introduction in 1948, it has been offered in a number of different calibers and barrel lengths, but is commonly chambered in .30-30 Winchester or .35 Remington, using a 20- or 24-inch barrel. Currently, the model with a 24-inch barrel is only available in .30-30 Winchester. The Model 336 is currently produced by Remington Arms.

  • 4Other models based on the Model S336 action
    • 4.3Model 1895

History[edit]

I couldn't find a match for that exact number, but 4700 series numbers show up in the '57 catalog, and most models used 5 digit numbers, '63 and later, there were several 47000 series models. And of course, there were numerous bikes made that were never shown in any catalog, like the Monark and Huffy built JC Higgins. J C Higgins Firearms Questions including 'What is the age and value of a JC Higgins shotgun' and 'Where do you find the ser number on a JC Higgins model 10 indent number. Higgins Model 50, a bolt action rifle with a commercial FN Mauser action and a chrome lined barrel from High Standard. Made in 270 and 30-06. Higgins Model 51, same as the Model 50 with a fancier checkered stock with cheekpiece.

Jc higgins serial number location

The Model 336 is a direct development of the Marlin Model 1893 rifle which was produced from 1893 to 1936.[1][2] Based on the patents of L.L. Hepburn, the Model 1893 incorporated a new locking bolt system and a two-piece firing pin.[2] In 1936, with only minor changes to the stock, forearm, and sights, the Model 1893 was redesignated the Model 1936 (soon renamed the Model 36).[2] All of these firearms featured a solid-top receiver made of forged steel and incorporated side ejection of fired cartridges.[2] Compared to the Winchester 94, then the predominant lever-action hunting rifle, the Model 36 was somewhat heavier with a simpler internal mechanism and a full pistol grip-type buttstock in contrast to the Winchester 94's straight grip stock.

In 1948, the Model 36 was replaced by the Model 336, which incorporated the patents of Thomas R. Robinson, Jr., a Marlin employee.[2] Sold under both the Marlin and Glenfield brands, the Model 336 has been in continuous production from 1948 to the present day, and is currently produced by Remington Firearms under the Marlin brand.

While most current variants of the Model 336 feature a full pistol-grip walnut stock, 20 inch barrel and full length tube magazine, other versions of the 336 have been frequently offered by Marlin over the years, including barrel lengths of 16.25-inch, 18-inch, 22-inch and 24-inch barrels, half-length magazines, and models with straight grips and/or hardwood (birch) stocks.[2]

Design[edit]

An evolution of the Model 36 rifle, the Model 336 is easily distinguished from its predecessors by its open ejection port machined into the side of the receiver. Design improvements include a stronger and simpler round-profile chrome-plated breech bolt, a redesigned cartridge carrier, an improved extractor,[3] and coil-type main and trigger springs in place of the flat springs used in earlier Marlin rifles.[2] Like its predecessors, the receiver and all major working parts of the Model 336 are constructed of steel forgings.[2]

With its solid, flat top receiver and side ejection of fired cartridges, the Marlin 336 is prime candidate for use with a rifle scope. In 1956, Marlin also incorporated its proprietary Micro-Groove rifling system into the Model 336 and other centerfire Marlin rifles.[2] This rifling system, which used an increased number of relatively shallow rifling grooves, cut down production time and significantly extended the service life of machine tooling.[4] According to Marlin, the Micro-Groove system provides very uniform bore dimensions and a very smooth bore finish designed to improve accuracy, prevent gas leakage, and reduce bore fouling.[4]

The Model 336 is designed to be easily disassembled for cleaning. Removal of the lever pivot screw with a flathead screwdriver, allows field stripping of the lever arm, bolt, and ejector for maintenance.[2] Unlike many lever action designs, the Model 336 can be cleaned from the breech, much like a bolt-action rifle.[2] This in turn avoids damage to the muzzle caused by cleaning rods and tools.

Production[edit]

As of 1983, the Model 336 was ranked the #2 all-time leader in U.S. high-powered sporting rifle sales, after the Winchester Model 1894, with over 3.5 million sold.[5]

Jc Higgins Serial Number Lookup

Other models based on the Model S336 action[edit]

This 30-30 Cal. Marlin rifle is engraved with scenes from American history commemorating America’s Bicentennial.

Marauder, Trapper, Model 336Y
Marlin has made short carbine versions of the Model 336 over the years, including the Model 336 Marauder, Trapper and the Model 336Y (Y standing for 'Youth Model'). Usually featuring a short 16- or 18-inch barrel, these carbines are considerably shorter and lighter than the standard 20' carbine. The Model 336Y also featured a short buttstock to enable use by younger shooters.
The Glenfield
For many years, Marlin produced a less-expensive Glenfield line of Model 336 rifles for retail at mass merchandise and department stores including: J.C. Penney, Sears Roebuck & Company, Western Auto, K-Mart and Wal-Mart. Marlin sold these rifles as the Glenfield Models 30, 30A, 30AS or 30AW. Other Model 336 production rifles were stamped with names chosen by the retailer, such as the J.C. Higgins (Sears) Model 45 and Model 50, the Montgomery Ward Western Field Model 740-A EMN, the J.C. Penney Foremost Model 3040, the K-Mart Model 30TK and the Model 3000 for Big 5 Sporting Goods. Mechanically identical to the Model 336, these mass market rifles were typically fitted with lower-cost hardwood (birch) stocks and forearms, and some metal finishing operations were eliminated in the interest of lowering unit cost.[2] By marketing a less-expensive version of the same rifle under a different name to mass merchandising stores, Marlin protected its customer base of small specialty gun dealers.[2]
Store Brand Models:
By 1983, most of Marlin's mass merchandise retailers were in a position to insist on name-brand firearms, and the Glenfield line was dropped. However, Marlin continued to offer a less expensive version of the Model 336, variously called the Model 336W or Model 30AW, originally sold only to the Wal-Mart chain. Fitted with a hardwood stock and lower-cost sights, these rifles were frequently offered as part of a special package with an inexpensive rifle scope, sling, or other options. The Marlin Model 30AW package included a 3-9x32 factory-mounted scope and padded sling, but was otherwise identical to the Marlin Model 336W.[6]
XLR Series:
Marlin also offers an XLR line of rifles in several calibers, all based on the Model 336 lever action design. The Model 336XLR features stainless construction, a 24-inch barrel, and a grey/black wood laminate stock.
Model 336SS
The Model 336M, a Model 336 carbine made largely of stainless steel, was introduced in 2000. It was replaced a year later by the Model 336SS, a 20' carbine offered only in .30-30 caliber. The Model 336SS features a forged stainless steel receiver, barrel, lever, and trigger. The magazine tube, springs, and loading gate are also fabricated from stainless, while other metal parts are nickel-plated steel.

Model 444[edit]

Introduced in 1965, the Model 444 Marlin uses the Model 336 lever action mechanism, including the signature open ejection port machined into the side of the receiver, but is chambered for the .444 Marlin cartridge.[2] At its introduction, the Model 444 was the most powerful lever action rifle on the market.[2] With a muzzle energy of more than 3000 ft/lb, the Model 444 was intended for the largest North American game animals.[2] The Model 444 holds 4 cartridges in the magazine and one in the chamber, and was originally fitted with a 24-inch barrel and a straight grip buttstock.[2]

Early Model 444 rifles utilized a 1 in 38' rifling twist and were handicapped by a lack of suitable bullet weights. In addition, nearly all existing bullets for the .444 had been originally designed solely for use in handguns; used in the Model 444, the bullets tended to break up at higher rifle velocities. A new 265-grain bullet greatly improved the utility of the Model 444 as a hunting rifle, and other bullet weights have since been introduced. In 1971, Model 444's barrel length was reduced to 22 inches, and the rifle's buttstock was changed to a full pistol-grip design.[2] Later production rifles received a change in barrel twist to 1 in 20 inches to stabilize longer and heavier bullets.[2]

Model 1894[edit]

In 1963, Marlin added the .44 Magnum cartridge as an optional chambering in the Model 336T carbine, which featured a straight grip, a 20-inch round tapered barrel, and a full-length magazine. However, the rifle experienced continuing problems in loading and chambering the short .44 Magnum cartridge, and in 1964 Marlin abruptly dropped the .44 Magnum option.[2]

Marlin was well aware of continued demand for a lever-action carbine in .44 Magnum caliber, and began searching for a replacement. In 1969, Marlin introduced the New Model 1894 in .44 Magnum/.44 Special caliber.[2] The New Model 1894 is not based on the Model 336 mechanism, instead, it uses the old short-receiver Model 1894 action incorporating the flat-profile bolt, which received minor improvements before being reintroduced in .44 Magnum caliber.[2] The decision to use the original Model 1894 action, a design originally designed to accommodate pistol-length cartridges such as the .38-40 and .44-40, proved a complete success.[2] In keeping with its predecessor, the New Model 1894 was given a straight grip buttstock instead of the pistol-grip style version fitted to the Model 336.[2] Since 1979, other calibers have been introduced for the Model 1894, including .38 Special/.357 Magnum, .41 Magnum, and the .45 Colt under the Models 1894C, 1894S, and 1894CS.[2] A cross-bolt safety was added in 1984.[2] The Model 1894 is particularly popular with cowboy action shooting enthusiasts, as well as shooters who desire to carry a shoulder arm and a revolver in the same caliber.

Model 1895[edit]

Introduced in 1972 and named in honor of the Marlin Model of 1895 (produced from 1895–1917), the current (New) Model 1895 rifle offered in .45-70 caliber utilizes the same Model 336 receiver design and lever action mechanism used in the Marlin Model 444.[2][7][8] A variant of the New Model 1895, called the 338MX and 338MXLR, is also available in the more modern .338 Marlin Express.[9]

.450 Marlin[edit]

Serial Number Lookup For Guns

The .45-70 was originally a black powder cartridge and most factory ammo is loaded moderately for safety in older rifles, including the original Model of 1895. With increasing numbers of modern .45-70 rifles built with high strength actions (including the current Model 1895, the Ruger No. 1 single shot, the Browning BLR or the Siamese Mauser conversions), handloaders and specialty ammunition makers like Hornady, Buffalo Bore and Garrett produce high intensity .45-70 loadings that may equal or exceed the power of the .444 Marlin. Some approach the power of the .458 Winchester Magnum and are effective against dangerous game up to and including elephants.[8] Use of such loadings in older .45-70 firearms is dangerous and should not be attempted; for that reason, Marlin introduced the .450 Marlin, a belted version of the .45-70 cartridge that will not chamber in older .45-70 rifles. However, many .45-70 Model 1895 owners chose to use the traditional .45-70 loads for deer-sized game with the option of using the high intensity .45-70 loads for more dangerous game.The 1895M lever-action rifle chambered in .450 Marlin was offered from 2000 until 2009 and is no longer in production.

Guide Guns[edit]

One recent innovation growing in popularity is the 'Guide Gun' concept. The name most probably originates from the types of longarms favored by Alaskan hunting and wilderness guides as a defense against attacks by bears. The Guide Gun concept consists of a handy, short-barreled (usually 16-19') lever action in a large caliber such as .45-70 or .450 Marlin with a 3/4 length magazine tube. Usually custom-made by a skilled gunsmith, these guns are usually fitted with either open sights (such as ghost rings or express sights), a reflex sight, holographic sight or a long eye-relief scope mounted on a scout rail. Marlin New Model 1895 actions are frequently used to build this type of firearm. In an attempt to capitalize on this trend, Marlin began offering custom versions of their New Model 1895 action beginning with the now-discontinued Models 1895SDT and 336SDT. Current 'Guide Gun' models include the Models 1895G, 1895GS, 1895GBL, 1895SBL, and 1895m.

Conversions[edit]

Aside from existing Marlin models, the basic Model 336/Model 1895 receiver and lever action mechanism has enjoyed some popularity as a parent for various wildcat caliber conversions. These custom rifles are increasingly popular in the western United States, Canada, and Alaska where encounters with grizzly bears and other potentially dangerous animals can be expected. Some of these wildcat cartridge conversions include the .450 Alaskan, .457 Wild West Magnum, .50 Alaskan, and the .510 Kodiak Express.

Of the conversions mentioned both the .450 Alaskan and the .457 Wild West Magnum do not require new barrels, but simply a chamber reaming and the required action modifications (referred to as 'action lengthening'); the .457 magnum also allows continued ability to use .45-70. The .510 Kodiak Express is the most powerful wildcat conversion available for the Marlin at 5,000+ ft-lbs.[10] Both the .50 Alaskan and .510 Kodiak Express require a new barrel to be installed on the rifle.

The .45-90 Sharps (also called .45-90 WCF or simply .45-90) has occasionally been used in converted Marlin 1895 rifles. The .45-90 conversion involves modifications to the action that increase the bolt travel and action timing (to adjust when a round is ejected, and when a new round lifts to enter the chamber), and the chamber in the barrel is reamed to .45-90 specifications. The case of a .45-90 is more than a quarter inch longer than the .45-70. The limitations on bolt travel of a converted Model 336 rifles are generally limit its case overall length (COL) to 2.85 inches. The 2.85 COL allows all bullets that work with the .45-70 action to be used in the converted .45-90. The .45-90 converted 1895 actions have the same pressure limitations as the .45-70 actions.

Marlin 336 Year of Manufacture[edit]

The following table can be used to date the year of manufacture of a Marlin 336. It is also valid for determining most other Marlin firearm build dates from 1946 to the present.

Marlin year of manufacture maybe determined from the following table of letter/numeral prefixes to the serial number:

DatePrefix(s)
1946C
1947D
1948E
1949F
1950G
1951H
1952J
1953K
1954L
1955M
DatePrefix(s)
1956N
1957P
1958R
1959S
1960T
1961U
1962V
1963W
1964Y,Z
1965AA
DatePrefix(s)
1966AB
1967AC
1968AD,68
196969
197070
197171
197272

Free Serial Number Lookup For Guns

Starting in 1973, the year of manufacture can be determined by subtracting the first two digits of the serial number from 100:Example: SN 2512345 would have been made in 1975 [100 - 25 = 75].

See also[edit]

References[edit]

  1. ^van Zwoll, Wayne. 'A Lever Rifle's Lineage'. Rifle Shooter. Petersens. Retrieved 18 October 2010.
  2. ^ abcdefghijklmnopqrstuvwxyzaaBrophy, William S., Marlin Firearms: A History of the Guns and the Company That Made Them, Stackpole Books, ISBN0811708772 (1989), pp. 193, 210, 216-221, 243, 252-267
  3. ^United States Patent Office, U.S. Patent No. 2,465,553, Application February 27, 1946: The extractor was designed by Thomas R. Robinson, Jr., a Marlin employee.
  4. ^ abFryxell, Glen E., Marlin's Micro Groove Barrels
  5. ^Wallack, LR. 'Sixty Million Guns'. 1983. In Gun Digest Treasury, Harold A. Murtz, editor, DBI Books. 1994 p.190 ISBN0873491564
  6. ^'Archived copy'. Archived from the original on 2008-10-03. Retrieved 2008-10-05.Cite uses deprecated parameter |deadurl= (help)CS1 maint: archived copy as title (link) Model 336W — Also Available with Mounted Scope
  7. ^Hornady (2003). 'Hornady Handbook of Cartridge Reloading'. vol I (6th Edition ed.). Hornady Mfg Co. p. 586.
  8. ^ abMetcalf, Dick, Marlin’s Newest .45-70: The Model 1895SBLArchived 2009-02-06 at the Wayback Machine Shooting Times, 23 September 2010
  9. ^van Zwoll, Wayne. 'All Aboard the .338 Marlin Express'. Rifle Shooter. Petersen's. Archived from the original on 7 November 2010. Retrieved 18 October 2010.Cite uses deprecated parameter |deadurl= (help)
  10. ^McPherson, M.L. (November 2008). 'The .510 Kodiak Express the 5,000 foot-pound Marlin'. Guns Magazine. Retrieved 18 October 2010.

External links[edit]

Retrieved from 'https://en.wikipedia.org/w/index.php?title=Marlin_Model_336&oldid=909657245'
Page 1 of 2
[ 21 posts ] Go to page1, 2Next
Print viewPrevious topic | Next topic
AuthorMessage
Posted: Tue Dec 28, 2004 2:33 pm
Limited Edition

Joined: Sun Dec 12, 2004 9:56 pm
Posts: 331
Location: Jacksonville, FL
I just recieved a 12 ga for Christmas from my wife's grandfather, here is what is stamped on it
LEFT SIDE, On Barrel
J.C. HIGGINS MODEL 20-12 GA.
SEARS, ROEBUCK AND C0 583 200
It also has a 'P' stamped near this lettering
RIGHT SIDE, On Barrel
PROOF TESTED-12GA-MOD
2 3/4' CHAMBER
Granpa did not remember when he bought it, but he guessed in the 50's.
I'm looking to use it as a field gun, and maybe shoot a little skeet with it (non-competitive, more as practice)
Any known problems with this model.
I am going to give it a real thorough cleaning before anything else, then swing by the local gunsmith to have it safety checked. (has not been fired since the 60's)



Top
Post subject: Re: JC HIGGINS/SEARS Model 20
*Proud to be a*

Joined: Fri Jan 09, 2004 2:39 pm
Posts: 3325
Location: Virginia
The JC Higgins Model 20 was made by High Standard, and is the same thing as the High Standard Model 200 and more-or-less the same as the HS Flite-King. The Flite-King was made in the '60s, but the Sears version was made before that. Numrich has parts for the JCH version http://www.e-gunparts.com/products.asp? ... 780z20&MC= and for the various versions of the HS Flite-King, such as this one http://www.e-gunparts.com/productschem. ... NG%20K-120

_________________
I'm a dyslexic agnostic insomniac.
I lay awake at night wondering if there is a dog.


Top
Posted: Tue Dec 28, 2004 8:42 pm
Tournament Grade

Joined: Wed Dec 31, 2003 12:45 am
Posts: 285
they are very well made shotguns a little on the heavy side but great shooters. if you have the one with choke tubes all the better. i take mine out every chance i get ..tony


Top
Posted: Tue Dec 28, 2004 10:28 pm
Limited Edition

Joined: Sun Dec 12, 2004 9:56 pm
Posts: 331
Location: Jacksonville, FL
Quick Question(s)
I have stripped it down to give it a good cleaning and re-blue the reciever & Barrel.
1- How do you remove the barrel (I am darn sure it is threaded)
2- How do you remove the stock?
Thanks.
I am a tad confuddled. I think it is just stuck, but I will ask before I do something stupid.
Thanks
Casey Bates


Top
Posted: Tue Dec 28, 2004 10:43 pm
*Proud to be a*

Joined: Fri Jan 09, 2004 2:39 pm
Posts: 3325
Location: Virginia
I think this High Standard owner's manual will cover your JC Higgins gun. http://www.histandard.info/manuals/hpas ... 6D150R.pdf
The HS Flite King is covered in the Gun Digest Book of Firearms Assembly/disassembly Part V Shotguns. I scanned it and didn't see any mention of removing the barrel. I don't think it can be removed except by a gunsmith.
However, this web site http://www.histandard.info/manuals/hpashotguns/
lists a separate version of the Flite King called the 'removable barrel series'. I don't think the JC Higgins is one of that series.

_________________
I'm a dyslexic agnostic insomniac.
I lay awake at night wondering if there is a dog.


Top
Posted: Tue Dec 28, 2004 10:59 pm
Tournament Grade

Joined: Wed Dec 31, 2003 12:45 am
Posts: 285
mrben has started you in the right direction,but under no conditions try to remove your barrel it's not made to come off. i have heard horror stories of people trying to remove barrels and ended up with monster tool marks that can't be removed and that's such a waste of a nice shotgun....tony


Top
Posted: Tue Dec 28, 2004 11:24 pm
Field Grade

Joined: Fri Dec 24, 2004 8:43 pm
Posts: 94
Location: wisconsin
Can't remember the site that I found this on months ago, but jotted down the jch m20 rollmarks and the corresponding years of manufacture in order to date my own model 20. Says your 583.200 was built in 1955. mine is a 52. All steel and as someone posted, a bit heavy,but has an uncommonly smooth action. Cycles as if there were no bolt in the reciever. I see one at every gun show for $100 to $125. at that price everyone should have one for a spare beater.


Top
Posted: Tue Dec 28, 2004 11:33 pm
Field Grade

Joined: Fri Dec 24, 2004 8:43 pm
Posts: 94
Location: wisconsin
Almost forgot, does anyone know where to find a left hand safety for a higgins model 20?


Top
Posted: Tue Dec 28, 2004 11:59 pm
Tournament Grade

Joined: Wed Dec 31, 2003 12:45 am
Posts: 285
try here http://www.histandard.info/manuals/sear ... index.html


Top
Posted: Wed Dec 29, 2004 12:51 am
Limited Edition

Joined: Sun Dec 12, 2004 9:56 pm
Posts: 331
Location: Jacksonville, FL
Just finished cleaning and reblueing it.
Cycles smooooth.
A little too late to test it though. I checked the feed/eject with dummy shells, and it works fine.


Top
Posted: Thu Dec 30, 2004 12:30 am
My first shotgun, which i purchased in 1958 and still have! They are VERY ROBUST. Simply clean, visually inspect for any cracks, function test and fire. I seriously doubt that you need a gunsmith to do that.
BTW, how can anyone date this gun from the roll marks? The # is not a serial number as these guns were before the GCA and is not a serial # but Model #? -Dick


Top
Posted: Thu Dec 30, 2004 2:41 am
Field Grade

Joined: Fri Dec 24, 2004 8:43 pm
Posts: 94
Location: wisconsin
The rollmark does not appear to refer directly to the date of manufacture, but rather to the particular lot of guns that was shipped to sears. Each mass order shipped seems to have been assigned a single number. For example, the first 3 digits (583) identify the manufacturer as high standard. While the remaining #s would refer to the shipment lot. Thus, the 4 shipments of model 20s sent to sears in 1955 were rollmarked 583.87, 583.88, 583.89, 583.200 No idea where they pulled these numbers from, but the site I found this on listed the rollmarks for shipments from 1947,till 1956.


Top
Posted: Fri Dec 31, 2004 10:51 am
The rollmark does not appear to refer directly to the date of manufacture, but rather to the particular lot of guns that was shipped to sears. Each mass order shipped seems to have been assigned a single number. For example, the first 3 digits (583) identify the manufacturer as high standard. While the remaining #s would refer to the shipment lot. Thus, the 4 shipments of model 20s sent to sears in 1955 were rollmarked 583.87, 583.88, 583.89, 583.200 No idea where they pulled these numbers from, but the site I found this on listed the rollmarks for shipments from 1947,till 1956.

Please supply the URL for the referenced site. Thanks. -Dick


Top
Posted: Fri Dec 31, 2004 11:24 am
Crown Grade

Joined: Sat Mar 30, 2002 3:53 pm
Posts: 8661
Location: Padua IL
Just click on the action style you want Budrichard... http://www.histandard.info/models/private/index.html 37featherlite nailed it.

_________________
If nothing sticks to teflon then how does teflon stick to the pan?


Top
Posted: Sat Jan 01, 2005 1:03 pm
Field Grade

Joined: Fri Dec 24, 2004 8:43 pm
Posts: 94
Location: wisconsin
Budrichard Your discription of the higgins m20 as (very robust) does kind of hit it right on the nose, don't it? Just meant to add that I've always wanted to find a 20ga version of this gun. However, every higgins m20 in 20ga, as well as every High Standard marked pump in 20ga that I've run across seems to have had a significant redesign (for the worse). Maybe a cost cutting move, I dunno, as this was the general period when milling intensive designs were being dropped in favor of designs utilizing more stamped parts. At any rate, the 20 guage is just not the same gun as the 12


Top
Posted: Sun Jan 02, 2005 12:06 pm
Thanks for the URL!
My Model 20 spent many years hunting ducks and pheasant, squirrels and rabbits until retired about 1980. While I was in graduate school. my best friend had it for a number of years using it duck hunting on the Mississppi. It still is in 96% condition. Since it was my first shotgun, it will be retired with me. -Dick


Top
Posted: Sun Dec 13, 2009 8:39 pm
Utility Grade

Joined: Sun Mar 04, 2007 2:01 pm
Posts: 17
Location: Central WA
I know this is an ancient thread, but just found it doing a search. The roll numbers date my dad's JCHiggins shotgun the same as year of my birth. Sort of made the hair stand up on the back of my neck. It's in excellent shape, guess I'll have to take it out bird hunting this week.


Top
Posted: Tue Dec 18, 2012 2:24 pm
Utility Grade

Joined: Tue Dec 18, 2012 2:19 pm
Posts: 1
Hope this helps,
Sears Pump Action Shotguns
Ident. No. Model Gauge Roll Mark Date
583.53 20 12 8/26/47
583.54 20 12 2/17/48
583.55 20 12 11/29/48
583.56 20 12 11/29/48
583.55 20 12 11/01/49
583.56 20 12 11/09/49
583.57 20 12 9/10/51
583.58 20 12 9/10/51
583.59 20 12 5/17/52
583.60 20 12 5/17/52
583.61 20 12 4/22/54
.
583.87 20 12 _/3/55
583.88 20 12 2/3/55
583.89 20 12 2/3/55
.
583.200 20 12 2/21/55
583.2001 20 12 11/06/56
583.2002 20 12
583.2003 20 12
583.2004 20 12
583.2005 20 12
583.2006 20 12
583.2025 21 12
583.2050 20 16
583.2051 20 16
.
583.2075 21 20
583.2076 21 20
583.2078 21 20
583.2079 21 20
583.2080 21 20
583.2085 21 .410
583.2086 21 .410
583.2087 21 .410
A typical roll mark will read:
J. C. HIGGINS, MODEL 20, 12 GA. SEARS, ROEBUCK AND CO. 583.88
and is usually rolled on the left side of the barrel just forward of the receiver.
Taken from data on sheet 2 of 5 compiled by J. J. Reardon _ 1/28/77
Transcribed by John J. Stimson, Jr. _ 6 April, 2002
Released ___ 6 April, 2002, Revised ___ 28 December, 2003
© John J. Stimson, Jr. 2002, 2003
--------------------------------------------------------------------------------
For questions about High Standard products, use the forum of this website
For questions about or problems with this website, contact: John Stimson, Jr.


Top
Posted: Sat Mar 02, 2013 1:08 pm
Utility Grade

Joined: Sat Mar 02, 2013 12:49 pm
Posts: 2
My grandfather passed down to me a J.C. Higgins model 20-12ga and the barrel is 2 3/4 inches, so i got the shells that would fit it. When i went to shoot it, the shells fit into the chamber and would shoot, however they would not fit into the magazine because of the shoulder on the shell. The shells are standard regular shells. Do I need special shells?, or is there something i have to do with the gun to allow them to fit into the magazine?


Top
Posted: Fri Mar 20, 2015 6:20 pm
Utility Grade

Joined: Thu Mar 19, 2015 5:25 pm
Posts: 4
Cleaning tip for these guns.... Always clean the inside of the receiver waaaaay up in the top. Junk builds up in a recess up in there. For example if you shoot a lot of clays or go to turkey shoots in the fall with this gun. Mine with the long range choke installed in South Carolina turkey shoots won pick-up truck loads of hams and turkeys. The build up (above part #9 the bolt) eventually clogs up the top of the receiver body and allows the bolt to open when firing. I.e. buildup prevents the bolt from locking completely. wow ! Scary when flames shoot out the right side... K W I M ? Any one else see this?



Top
Page 1 of 2
[ 21 posts ] Go to page1, 2Next